Current progress of 3D printing technology in chest wall reconstruction

doi:10.3877/cma.j.issn.1673-9450.2020.05.015

Abstract

Abstract:

The chest wall defect, which result from congenital malformation, dysplasia, trauma, primary or secondary tumor, will destroy the integrity and stability of the thorax and seriously threaten the life quality and health of patients. Therefore, reconstruction of the chest wall is necessary. With optimization of 3D printing technology and breakthroughs in materials science, joint reconstruction of sternum, rib, chest rib and other clinical work can be accomplished by 3D printing, thus repairing the outward appearance and function of the thorax. This review focuses on the current advances of 3D printing technology in chest wall reconstruction.

Key words: Research, Thoracic wall, Reconstruction, 3D printing, Material

Yibo Shan, Xuewei Jiang, Guiping Yu. Current progress of 3D printing technology in chest wall reconstruction[J]. Chinese Journal of Injury Repair and Wound Healing(Electronic Edition), 2020, 15(05): 407-410.

/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://zhssyxfzz.cma-cmc.com.cn/EN/10.3877/cma.j.issn.1673-9450.2020.05.015

https://zhssyxfzz.cma-cmc.com.cn/EN/Y2020/V15/I05/407

References 43

[7]	Wang X. Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting[J]. Micromachines (Basel), 2019, 10(12): pii: E814.
[8]	Parr WCH, Burnard JL, Wilson PJ, et al. 3D printed anatomical (bio)models in spine surgery: clinical benefits and value to health care providers[J]. J Spine Surg, 2019, 5(4): 549-560.
[9]	Pastor-Artigues MM, Roure-Fernández F, Ayneto-Gubert X, et al. Elastic Asymmetry of PLA Material in FDM-Printed Parts: Considerations Concerning Experimental Characterisation for Use in Numerical Simulations[J]. Materials (Basel), 2019, 13(1): pii: E15.
[10]	Fereiduni E, Ghasemi A, Elbestawi M. Characterization of Composite Powder Feedstock from Powder Bed Fusion Additive Manufacturing Perspective[J]. Materials (Basel), 2019, 12(22): pii: E3673.
[11]	Zhang S, Li M, Hao N, et al. Stereolithography 3D Printing of Lignin-Reinforced Composites with Enhanced Mechanical Properties[J]. ACS Omega, 2019, 4(23): 20197-20204.
[12]	Chen SG, Yang J, Jia YG, et al. TiO2 and PEEK Reinforced 3D Printing PMMA Composite Resin for Dental Denture Base Applications[J]. Nanomaterials (Basel), 2019, 9(7): pii: E1049.
[13]	Han X, Yang D, Yang C, et al. Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications[J]. J Clin Med, 2019, 8(2): pii: E240.
[14]	Stefan P, Pfandler M, Lazarovici M, et al. Three-dimensional-Printed Computed Tomography-Based Bone Models for Spine Surgery Simulation[J]. Simul Healthc, 2020, 15(1): 61-66.
[15]	Pan S, Zhong Y, Shan Y, et al. Selection of the optimum 3D-printed pore and the surface modification techniques for tissue engineering tracheal scaffold in vivo reconstruction[J]. J Biomed Mater Res A, 2019, 107(2): 360-370.
[16]	Zabaleta J, Aguinagalde B, López I, et al. Creation of a multidisciplinary and multicenter study group for the use of 3D printing in general thoracic surgery: lessons learned in our first year experience[J]. Med Devices (Auckl), 2019, 12: 143-149.
[17]	Bernhard JC, Isotani S, Matsugasumi T, et al. Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education[J]. World J Urol, 2016, 34(3): 337-345.
[18]	Leuzzi G, Nachira D, Cesario A, et al. Chest wall tumors and prosthetic reconstruction: A comparative analysis on functional outcome[J]. Thorac Cancer, 2015, 6(3): 247-254.
[19]	Suzuki K, Park BJ, Adusumilli PS, et al. Chest wall reconstruction using a methyl methacrylate neo-rib and mesh[J]. Ann Thorac Surg, 2015, 100(2): 744-747.
[20]	Makarawo TP, Reynolds RA, Cullen ML. Polylactide bioabsorbable struts for chest wall reconstruction in a pediatric patient[J]. Ann Thorac Surg, 2015, 99(2): 689-691.
[21]	Rocco G, La Rocca A, La Manna C, et al. Arena roof technique for complex reconstruction after extensive chest wall resection[J]. Ann Thorac Surg, 2015, 100(4): 1479-1481.
[22]	Li W, Zhang G, Ye C, et al. Autogenous rib graft for reconstruction of sternal defects[J]. J Thorac Dis, 2014, 6(12): 1851-1852.
[23]	Kwok IH, Pallett SJ, Massa E, et al. Pre-operative digital templating in cemented hip hemiarthroplasty for neck of femur fractures[J]. Injury, 2016, 47(3): 733-736.
[24]	Moradiellos J, Amor S, Córdoba M, et al. Functional Chest Wall Reconstruction With a Biomechanical Three-Dimensionally Printed Implant[J]. Ann Thorac Surg, 2017, 103(4): e389-e391.
[25]	Honigmann P, Sharma N, Okolo B, et al. Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application[J]. Biomed Res Int, 2018: 4520636
[26]	Chen SG, Yang J, Jia YG, et al. TiO2 and PEEK Reinforced 3D Printing PMMA Composite Resin for Dental Denture Base Applications[J]. Nanomaterials (Basel), 2019, 9(7): pii: E1049.
[27]	Song KJ, Kim GH, Choi BY. Efficacy of PEEK cages and plate augmentation in three-level anterior cervical fusion of elderly patients[J]. Clin Orthop Surg, 2011, 3(1): 9-15.
[28]	Han X, Sharma N, Xu Z, et al. An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants[J]. J Clin Med, 2019, 8(6): pii: E771.
[29]	Gao A, Liao Q, Xie L, et al. Tuning the surface immunomodulatory functions of polyetheretherketone for enhanced osseointegration[J]. Biomaterials, 2020, 230: 119642.
[30]	Han X, Yang D, Yang C, et al. Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications[J]. J Clin Med, 2019, 8(2): pii: E240.
[31]	Jung HD, Jang TS, Lee JE, et al. Enhanced bioactivity of titanium-coated polyetheretherketone implants created by a high-temperature 3D printing process[J]. Biofabrication, 2019, 11(4): 045014.
[32]	Chon JW, Yang X, Lee SM, et al. Novel PEEK Copolymer Synthesis and Biosafety - I: Cytotoxicity Evaluation for Clinical Application[J]. Polymers (Basel), 2019, 11(11): pii: E1803.
[33]	Ma J, Liang Q, Qin W, et al. Bioactivity of nitric acid and calcium chloride treated carbon-fibers reinforced polyetheretherketone for dental implant[J]. J Mech Behav Biomed Mater, 2019, 102: 103497.
[34]	Basgul C, Yu T, MacDonald DW, et al. Structure-Property Relationships for 3D printed PEEK Intervertebral Lumbar Cages Produced using Fused Filament Fabrication[J]. J Mater Res, 2018, 33(14): 2040-2051.
[35]	Lipinska J, Kutwin L, Wawrzycki M, et al. Chest reconstruction using a custom-designed polyethylene 3D implant after resection of the sternal manubrium[J]. Onco Targets Ther, 2017, 10: 4099-103.
[36]	王少强，陈静，魏松洋，等. 胸壁肿瘤切除后胸壁缺损的修复[J]. 组织工程与重建外科杂志，2019, 15(4): 237-240.
[37]	Thomas M, Shen KR. Primary tumors of the osseous chest wall and their management [J]. Thorac Surg Clin, 2017, 27(2): 181-193.
[38]	Cipriano A, Burfeind W Jr. Management of primary soft tissue tumors of the chest wall [J]. Thorac Surg Clin, 2017, 27(2): 139-147.
[1]	Petrella F, Lo Iacono G, Casiraghi M, et al. Chest wall resection and reconstruction by composite prosthesis for locally recurrent breast carcinoma[J]. J Thorac Dis, 2020, 12(1): 39-41.
[2]	Wen X, Gao S, Feng J, et al. Chest-wall reconstruction with a customized titanium-alloy prosthesis fabricated by 3D printing and rapid prototyping[J]. J Cardiothorac Surg, 2018, 13(1): 4.
[3]	王磊，李靖，钟代星. 胸壁肿瘤切除及胸壁重建手术中国专家共识(2018版)[J]. 中国胸心血管外科临床杂志，2019, 26(1): 1-7.
[4]	钟代星，王磊，李小飞，等. 胸壁骨性重建的研究进展[J]. 中国肺癌杂志，2018, 21(4): 273-276.
[5]	黎吉娜，叶曼，熊学兰，等. 胸部肿瘤切除联合3D打印碳纤维胸壁重建术患者的护理[J]. 护理学杂志，2019, 34(1): 42-43, 65.
[6]	Choy WJ, Parr WCH, Phan K, et al. 3-dimensional printing for anterior cervical surgery: a review[J]. J Spine Surg, 2018, 4(4): 757-769.
[39]	Wald O, Islam I, Amit K, et al. 11-year experience with Chest Wall resection and reconstruction for primary Chest Wall sarcomas[J]. J Cardiothorac Surg, 2020, 15(1): 29.
[40]	Ahmad SB, Hoellwarth J, Christie N, et al. Radical resection of a giant rib osteosarcoma with complex chest wall reconstruction[J]. Int J Surg Case Rep, 2019, 62: 17-20.
[41]	Wang L, Huang L, Li X, et al. Three-Dimensional Printing PEEK Implant: A Novel Choice for the Reconstruction of Chest Wall Defect[J]. Ann Thorac Surg, 2019, 107(3): 921-928.
[42]	Kang J, Wang L, Yang C, et al. Custom design and biomechanical analysis of 3D-printed PEEK rib prostheses[J]. Biomech Model Mechanobiol, 2018, 17(4): 1083-1092.
[43]	李涤尘，杨春成，康建峰，等. 大尺寸个体化PEEK植入物精准设计与控制定制研究[J]. 机械工程学报，2018, 54(23): 121-125.

Please choose a citation manager

Content to export